Ice Dam or Drainage Repairs

Purpose: Prevent water and ice buildup.

1. Check attic insulation and ventilation.
2. Clear gutters and downspouts.
3. Use roof rake to remove winter buildup.
4. Add heat cables if recurring ice issues.

Shingle Repairs or Replacement

Purpose: Fix cracked, missing, or curled shingles to prevent leaks and extend roof life.

1. Find damaged shingles. Lift the shingle above with a pry bar and remove nails.
2. Slide out the damaged shingle and replace it.
3. Nail the new shingle and apply sealant to edges.

Leak Repairs

Purpose: Stop water intrusion and prevent structural damage.

1. Locate the leak from attic stains or exterior clues.
2. Clean and dry the area thoroughly.
3. Apply roofing cement and patch with membrane or shingle.
4. Seal all edges and test with light water spray.

Skylight Repairs

Purpose: Seal leaks and replace gaskets.

1. Check skylight for cracks or water marks.
2. Clean surfaces and reseal with new gasket or sealant.

Gutter and Downspout Repairs

Purpose: Keep proper drainage from roof.

1. Clear gutters and rinse.
2. Reseal leaking joints and reattach loose sections.
3. Make sure downspouts direct water away from the foundation.

Structural or Decking Repairs

Purpose: Replace rotted or weak decking.

1. Find soft spots or sagging.
2. Remove damaged area and replace with new plywood.
3. Restore underlayment and shingles.

Storm Damage Repairs

Purpose: Handle wind, hail, or debris damage.

1. Document damage for insurance.
2. Cover exposed areas temporarily.
3. Replace missing shingles and inspect for hidden damage.

Routine Maintenance

Purpose: Extend roof lifespan and prevent major issues.

Checklist:

1. Reseal exposed nails yearly.
2. Clear roof valleys and gutters.
3. Inspect after storms.
4. Trim overhanging branches.

Flashing Repairs

Purpose: Prevent leaks around chimneys, vents, and joints.

1. Inspect flashing for rust or gaps.
2. Remove damaged sections and fit new flashing.
3. Nail in place and seal with roofing cement.

Vent Boot Repairs

Purpose: Fix leaks around vent pipes.

1. Remove shingles around the vent.
2. Slide off the old boot and replace with a new one.
3. Fit under shingles and seal with roofing cement.